The color matching of sedan repair paint is based on the "spectral color" manufacturing specification card. The color matching can be found from the color card, or according to the coating sample provided by the user.

The specific steps for car paint care techniques are as follows:

(1) To accurately distinguish colors, first apply colors according to the color palette, accurately distinguish their "hue", "brightness", and "purity" under standard light source conditions, and confirm the main color, background color, and other necessary quality colors and adjust the "hue", "brightness", and "purity" of the primary color materials based on this.

(2) The correct selection of color materials requires the use of sharp shapes, types, diluents, and auxiliary materials of color coatings, and the selection of functional and economical primary color materials for use.

(3) After adjusting the sample first, many adjustments should be made. In the absence of color matching equipment, it is even more important to adjust the sample first to obtain the accuracy of the color matching ratio, laying a foundation for reducing waste in many adjustments.

(4) The modulation steps and methods should strictly follow the principle of prioritizing the main and then the secondary, from shallow to deep, and should be thoroughly stirred and evenly dissolved during mixing.

(5) The participation of auxiliary materials should be strictly proportional to the appropriate types, and timely and appropriate amounts should be mixed evenly. It should be pointed out that the color mixing paint is wet while the sample color is solid, so the color after the paint color should be slightly lighter than the sample structure, not similar, nor too deep. It should be slightly lighter than the original color, so that after the paint dries, it will be the same board color together, otherwise it will be too dark.

Article source: Automotive repair paint http://www.jinliangxincai.com