(1) To distinguish colors, first color them according to the color palette, and distinguish their "hue", "brightness", and "purity" under standard light source conditions. Based on this, determine the main color, background color, and other necessary fineness and adjust the "hue", "brightness", and "purity" of the primary color materials.

(2) The correct selection of color materials requires the use of sharp shapes, types, diluents, and auxiliary materials of color coatings, as well as the selection of functional and economical primary color materials.

(3) After adjusting the sample first, many adjustments should be made. In the absence of color matching equipment, it is even more important to adjust the sample first to obtain accurate color matching ratio, laying a foundation for reducing waste in many adjustments.

(4) The modulation process and methods should strictly adhere to the principle of prioritizing the main and then the secondary, from shallow to deep, and be thoroughly mixed and evenly dissolved during mixing.

(5) The participation of auxiliary materials should be strictly proportional to the appropriate types, and when mixing, an appropriate amount should be mixed evenly. It should be pointed out that the color mixing paint is wet while the sample color is solid, so the color after the paint tone should be slightly lighter than the sample structure, not too near or too deep. It should be slightly lighter than the original color, so that after the paint dries, it will be the same board color together, otherwise it will be too dark.

Article source: Qingyuan Automotive Repair Paint http://www.jinliangxincai.com/